Syroc centrifugal process pumps
A complete range of centrifugal pumps for water, wastewater and process liquids, selected by Vaikon for your duty point and supplied as bare-shaft pump or as a complete unit with motor.
Up to 6000 m³/hUp to 550 m headMultiple materials

One range, many duties
From EN 733 and ISO 2858 process pumps to double-suction split case and multistage pumps.
Material options
Casing and impeller in cast iron, bronze, AISI 316 stainless steel or duplex.
Sealing to suit
Gland packing or mechanical seal, depending on the liquid and the duty.
The Syroc range
Maximum values per pump type. Vaikon selects the right size for your duty point.

End-suction process pumps (EN 733)

Close-coupled pumps

In-line pumps

Wastewater and process pumps

Multistage pumps

Heavy-duty process pumps (ISO 2858)

Double-suction split case pumps
Materials and sealing
Selected, supplied and serviced by Vaikon
Quotation within 24 hours
Free on-site assessment
Overhaul and 24/7 service
Delivery across Europe
Frequently asked questions
It depends on flow, head and liquid: end-suction pumps for most process duties, split case pumps for large flows, multistage pumps for high heads and wide-volute pumps for liquids with solids. Vaikon selects the pump for your duty point.
Casing and impeller in cast iron GG25, bronze GCuSn10, AISI 316 stainless steel or duplex 1.4517.
Yes. We supply the pump bare-shaft or as a complete unit with pump, coupling and motor on a baseplate.
Tell us your liquid, flow and head and we select the right Syroc pump.
Quotation within 24 hours